A Simple,High‐Yield Synthesis of DNA Duplexes Containing a Covalent,Thermally Cleavable Interstrand Cross‐Link at a Defined Location

Interstrand DNA–DNA cross‐links are highly toxic to cells because these lesions block the extraction of information from the genetic material. The pathways by which cells repair cross‐links are important, but not well understood. The preparation of chemically well‐defined cross‐linked DNA substrates represents a significant challenge in the study of cross‐link repair. Here a simple method is reported that employs “post‐synthetic” modifications of commercially available 2′‐deoxyoligonucleotides to install a single cross‐link in high yield at a specified location within a DNA duplex. The cross‐linking process exploits the formation of a hydrazone between a non‐natural N⁴‐amino‐2′‐deoxycytidine nucleobase and the aldehyde residue of an abasic site in duplex DNA. The resulting cross‐link is stable under physiological conditions, but can be readily dissociated and re‐formed through heating–cooling cycles.     

Identification of antibacterial and antioxidant constituents of the essential oils of Cynanchum chinense and Ligustrum compactum

The aim of this research was to determine the chemical composition, antioxidant and antibacterial properties of the essential oils from Cynanchum chinense and Ligustrum compactum and isolation of antioxidant and antibacterial constituents from the essential oils. Thirty-eight components were identified in essential oils. Based on bioactivity-guided fractionation, guaiacol, linalool and 2-phenylethanol were isolated and identified as active constituents. Both L. compactum flower oil and 2-phenylethanol showed high antibacterial performance, with inhibition zone from 22.8 ± 0.8 to 11.9 ± 2.0 mm at highest concentration, and minimum inhibitory concentration values ranging from 0.25% to 1%. In both DPPH and ABTS assay, the active constituent guaiacol (IC₅₀ = 4.15 ± 0.72 and 9.12 ± 0.98 μg mL^? 1, respectively) exhibited high antioxidant activity, and the oils showed moderate antioxidant activity. These results indicate potential efficacy of active constituents and essential oils of L. compactum and C. chinense to control food-borne pathogenic and spoilage bacteria.     

Crystal structures of the pyrazinamide–p‐aminobenzoic acid (1/1) cocrystal and the transamidation reaction product 4‐(pyrazine‐2‐carboxamido)benzoic acid in the molten state

The synthesis of pharmaceutical cocrystals is a strategy to enhance the performance of active pharmaceutical ingredients (APIs) without affecting their therapeutic efficiency. The 1:1 pharmaceutical cocrystal of the antituberculosis drug pyrazinamide (PZA) and the cocrystal former p‐aminobenzoic acid (p‐ABA), C₇H₇NO₂·C₅H₅N₃O, (1), was synthesized successfully and characterized by relevant solid‐state characterization methods. The cocrystal crystallizes in the monoclinic space group P2₁/n containing one molecule of each component. Both molecules associate via intermolecular O—H...O and N—H...O hydrogen bonds [O...O = 2.6102 (15) Å and O—H...O = 168.3 (19)°; N...O = 2.9259 (18) Å and N—H...O = 167.7 (16)°] to generate a dimeric acid–amide synthon. Neighbouring dimers are linked centrosymmetrically through N—H...O interactions [N...O = 3.1201 (18) Å and N—H...O = 136.9 (14)°] to form a tetrameric assembly supplemented by C—H...N interactions [C...N = 3.5277 (19) Å and C—H...N = 147°]. Linking of these tetrameric assemblies through N—H...O [N...O = 3.3026 (19) Å and N—H...O = 143.1 (17)°], N—H...N [N...N = 3.221 (2) Å and N—H...N = 177.9 (17)°] and C—H...O [C...O = 3.5354 (18) Å and C—H...O = 152°] interactions creates the two‐dimensional packing. Recrystallization of the cocrystals from the molten state revealed the formation of 4‐(pyrazine‐2‐carboxamido)benzoic acid, C₁₂H₉N₃O₃, (2), through a transamidation reaction between PZA and p‐ABA. Carboxamide (2) crystallizes in the triclinic space group P with one molecule in the asymmetric unit. Molecules of (2) form a centrosymmetric dimeric homosynthon through an acid–acid O—H...O hydrogen bond [O...O = 2.666 (3) Å and O—H...O = 178 (4)°]. Neighbouring assemblies are connected centrosymmetrically via a C—H...N interaction [C...N = 3.365 (3) Å and C—H...N = 142°] engaging the pyrazine groups to generate a linear chain. Adjacent chains are connected loosely via C—H...O interactions [C...O = 3.212 (3) Å and C—H...O = 149°] to generate a two‐dimensional sheet structure. Closely associated two‐dimensional sheets in both compounds are stacked via aromatic π‐stacking interactions engaging the pyrazine and benzene rings to create a three‐dimensional multi‐stack structure.     

结合PBL课例的无机化学线下对分课堂教学设计与实践*

以原电池一节教学设计为例,探索了将PBL课例融入对分课堂教学模式。教学实践表明,新教学模式激发了学生的学习兴趣,提高了学生学习的积极性和主动性,提升了课程教学效果,达到了课程教学目标。对PBL课例与对分课堂有机融合的全新课堂教学模式的建设与发展进行了展望。     

Key factors for designing single-atom metal-nitrogen-carbon catalysts for electrochemical CO2 reduction

The electrochemical CO₂ reduction (CO₂RR) is a sustainable approach to mitigate the increased CO₂ emissions and simultaneously produce value-added chemicals and fuels. Metal-nitrogen-carbon (M-N-C) based single-atom catalysts (SACs) have emerged as promising electrocatalysts for CO₂RR with high activity, selectivity, and stability. To design efficient SACs for CO₂RR, the key influence factors need to be understood. Here, we summarize recent achievements on M-N-C SACs for CO₂RR and highlight the significance of the key constituting factors, metal sites, the coordination environment, and the substrates, for achieving high CO₂RR performance. The perspective views and guidelines are provided for the future direction of developing M-N-C SACs as CO₂RR catalysts.     

KIT-6负载CeO2催化CO2和甲醇合成碳酸二甲酯

采用不同老化温度(80、100、120和150℃)合成了一系列KIT-6载体,并通过浸渍法制备了相应的CeO_2/KIT-6催化剂。结合X射线衍射、N_2物理吸附、NH_3程序升温脱附、CO_2程序升温脱附、透射电子显微镜、傅里叶变换红外光谱和X射线光电子能谱等表征结果,详细考察了老化温度对KIT-6结构以及CeO_2/KIT-6催化剂直接催化CO_2和甲醇合成碳酸二甲酯(DMC)反应活性的影响。结果表明,不同老化温度下制备的KIT-6均保持其独特的三维孔道结构。随着老化温度升高,KIT-6比表面积先增大后减小,当老化温度为100℃时,KIT-6比表面积达到最大(683 m~2·g~(-1))。KIT-6较高的比表面积有利于提高CeO_2分散度,进而提高暴露的活性位点数量,催化活性随催化剂表面中等碱/酸性吸附位数量和Ce~(3+)含量的增加而逐渐提高。其中,CeO_2/100-KIT-6催化剂中CeO_2颗粒尺寸最小(5.9 nm),暴露的活性位数量最高,催化活性最佳。随后,考察了反应温度和压力对CeO_2/100-KIT-6催化活性的影响。随着反应温度提高,催化活性先升高后降低,当反应温度为140℃时,催化活性最高;且催化活性随反应压力的提高而逐渐增加。在反应温度为140℃、压力为6.8 MPa条件下,催化剂经6次循环后,DMC收率由15 mmol·g_(CeO_2)~(-1)逐渐降低至2.8 mmol·g_(CeO_2)~(-1),原因归结为反应过程中CeO_2纳米颗粒发生团聚,使暴露出的活性位数量减少。     

Conductive 2D Metal-organic Framework (Co,NiCo, Ni) Nanosheets for Enhanced Non-enzymatic Detection of Urea

2D metal-organic framework (MOF) has potential applications in electrocatalysis owing to fast mass transfer, charge transfer and large specific surface area. Here, we had prepared three conductive 2D MOF based on Ni, NiCo and Co in a simple and rapid way. The 2D nanostructure of MOF was confirmed by SEM and TEM. The chemical composition was studied by XRD, Raman and XPS spectrum. The electrochemical oxidation and detection was investigated through cyclic voltammetry and current-time method. Their sensing performance for urea was determined by varying oxidation potentials and metal sites. The non-enzymatic Ni-, NiCo- and Co-MOF sensors had good catalytic activity for urea. Compared with NiCo- and Co-MOF, Ni-MOF had a wider linear range (0.5–832.5 μM), high sensitivity (1960 μA mM⁻¹ cm⁻²), low detection limit (0.471 μM), and fast response time. The sensors had well repeatability, reproducibility, and selectivity to specific interfering species. Furthermore, Ni- and NiCo-MOF modified electrode was also applied to detection of milk samples. The results showed that the recovery was satisfactory, which further confirmed the effectiveness of non-enzyme sensor. In general, the highly-sensitive 2D Ni- and NiCo-MOF modified electrode has great potential as nonenzymatic urea sensors for real samples detection in hydrogen energy, clinical diagnostics, and environmental protection, et al.     

LeDock与PyMOL软件在天然产物化学课程教学中的应用*——以中药防治新冠病毒肺炎(COVID-19)为例

以中药防治新冠病毒肺炎(COVID-19)为例,在天然产物化学课程教学中借助LeDock软件进行天然产物小分子与受体蛋白分子之间的半柔性对接,用PyMOL软件分析天然产物小分子与受体蛋白分子之间的相互作用,全方位充分展示天然产物分子结构和功能之间的关系。教学围绕我国当前形势展开,让学生在了解事实的同时激发其学习热情,培养学生的逻辑思维能力和动手能力,以此来提高教学质量。     

Synthesis of a Novel Chitosan/Basil Oil Blend and Development of Novel Low Density Poly Ethylene/Chitosan/Basil Oil Active Packaging Films Following a Melt-Extrusion Process for Enhancing Chicken Breast Fillets Shelf-Life

An innovative process for the adsorption of the hydrophobic Basil-Oil (BO) into the hydrophilic food byproduct chitosan (CS) and the development of an advanced low-density polyethylene/chitosan/basil-oil (LDPE/CS_BO) active packaging film was investigated in this work. The idea of this study was the use of the BO as both a bioactive agent and a compatibilizer. The CS was modified to a CS_BO hydrophobic blend via a green evaporation/adsorption process. This blend was incorporated directly in the LDPE to produce films with advanced properties. All the obtained composite films exhibited improved packaging properties. The film with 10% CS_BO content exhibited the best packaging properties, i.e., 33.0% higher tensile stress, 31.0% higher water barrier, 54.3% higher oxygen barrier, and 12.3% higher antioxidant activity values compared to the corresponding values of the LDPE films. The lipid oxidation values of chicken breast fillets which were packaged under vacuum using this film were measured after seven and after fourteen days of storage. These values were found to be lower by around 41% and 45%, respectively, compared with the corresponding lipid oxidation values of pure LDPE film.     

双活性磺酸基蔗渣木聚糖对羟基苯甲酸酯的合成及活性模拟

以蔗渣木聚糖(BX)为主要原料、氨基三磺酸钠为酯化剂,在一步酯化合成磺酸基蔗渣木聚糖酯的基础上,利用磺酸基蔗渣木聚糖酯和对羟基苯甲酸进行二步酯化反应,合成了磺酸基蔗渣木聚糖对羟基苯甲酸酯,并考察了反应条件对酯化反应的影响,通过单因素实验确定了第二步酯化反应较佳的合成工艺条件.蔗渣木聚糖酯化改性前后的样品分别用FT-IR,DG-DTG和XRD进行了表征,并对该双酯化衍生物的分子进行了优化与活性模拟.结果表明:FT-IR证明双酯化产物含有磺酸基团和对羟基苯甲酸酯基团,TG-DTG分析表明该双酯化衍生物的热稳定性提高,XRD说明发生双酯化改性后分子排列的规整性提高,结晶度增加;活性模拟实现了磺酸基蔗渣木聚糖对羟基苯甲酸酯与艾滋病毒的对接.